Treat 1.9m as a product identifier, not a finished drawing
The verified GOODCASE catalog lists a custom 1.9m DJ Table Flight Case with pure-white-background product images, reinforced structure, protective hardware and OEM/ODM B2B customization support. The name identifies the product offer, but it does not by itself define the final packed envelope, clear work surface or buyer-specific internal layout. Procurement should request a dimensioned proposal based on the physical equipment and intended venue workflow.
Build a scaled top-view schedule of every controller, mixer, computer, display, stand, power item, cable and loose accessory. For each item, record quantity, measured outline, measured weight, transport orientation and whether it remains installed. Mark interfaces that cannot be contacted and pieces that must be stored separately. A revision date on both the schedule and photographs prevents an obsolete booth layout from reaching production.
Check deployment space from all sides
Show the case closed, at each deployment step and in the final operating arrangement. Dimension the space for removing and storing covers, positioning any supplier-proposed table elements, installing equipment and allowing the operator to stand and move. Add front, rear and side service access, sightlines and adjacent stage or booth boundaries. Proposed shelves, supports, legs or moving parts must be identified on the drawing rather than inferred from the product title.
Prepare a connection map that identifies plug outline, cable direction, service loop and the buyer-approved bend requirement for each power, signal and network lead. Indicate the connection sequence and the route from equipment to floor or site distribution. Keep ventilation openings, controls and display areas clear in the reviewed layout. Ask the supplier to show where loose cables and adapters are stored during transport and operation.
Run a route trial before commercial release
Measure the restrictive points from warehouse to booth: doors, lifts, ramps, vehicle openings, thresholds, corridors, turns and the final setup area. Compare those measurements with the supplier's proposed packed envelope and the buyer's measured loaded weight. Rehearse unloading, positioning, opening, assembly if proposed, equipment placement, connection and reverse packing, and document every point where the planned sequence cannot be completed.
The main GOODCASE product page remains the owner of the 1.9m DJ Table Flight Case offer; this supporting article organizes engineering inputs for procurement. Release the quotation only when the equipment schedule, component list, dimensional drawing, connection map and route trial share one revision. Materials, construction, configuration, handling limits, tests, certificates, finish, delivery and performance commitments require supplier-specific written evidence and must not be inferred from catalog wording.