Measure the operating envelope
Record controller body, jog wheels, faders and removable cable plugs. Use the real equipment, the same orientation planned for transport, and one agreed unit system. Catalogue dimensions alone may omit knobs, feet, plugs or temporary attachments. For this Red DJ Table Flight Case, the evidence set should explicitly cover controller body, jog wheels, faders and removable cable plugs.
Photograph the tape or calliper position and label every dimension. The measurement set should show the rigid body, the largest operating envelope and any part that is removed before packing, so reviewers do not combine incompatible values. Keep controller body, jog wheels, faders and removable cable plugs visible in the review record for this Red DJ Table Flight Case.
Turn dimensions into usable clearance
Review laptop shelf travel, operating angle and hand clearance. Clearance is a functional decision: a connector needs room to bend, a control needs hand access and a moving part needs an unobstructed path. Do not add one arbitrary allowance to every side. For this Red DJ Table Flight Case, the evidence set should explicitly cover laptop shelf travel, operating angle and hand clearance.
Mark surfaces that may support the load separately from surfaces that must remain untouched. Confirm where foam or restraints may contact the equipment and where ventilation, optics, displays or controls require a protected gap. Keep laptop shelf travel, operating angle and hand clearance visible in the review record for this Red DJ Table Flight Case.
Cross-check the loaded workflow
Validate setup order, loose accessories and booth footprint. Make a simple packing and removal walkthrough with the people who handle the equipment; it often exposes missing grip space, an incorrect orientation or a lid that cannot be stored nearby. For this Red DJ Table Flight Case, the evidence set should explicitly cover setup order, loose accessories and booth footprint.
Issue a dated measurement sheet with photos, units and equipment version. Before fabrication, compare the drawing with that sheet and record any change to accessories, connectors or operating position. Keep setup order, loose accessories and booth footprint visible in the review record for this Red DJ Table Flight Case.